IP BASED PAN-TILT POSITIONERS

• BASIC IP PT Control System
  The BASIC IP PT Control System is a completely IP based position control system that has been designed to provide "basic" pan-tilt control of a camera, IR light, or small antenna.
  
  This system provides essential control of the JPTH-13 pan-tilt head. Controls are limited to Pan-Right, Pan-Left, Tilt-Up and Tilt-Down as shown below. However, custom web pages are easily developed to also include diagonal movements using a simple HTML based API.
  
  The BASIC system is low in cost, but does not sacrifice any harsh environment capabilities. Further, the low power consumption of the BASIC systems makes it the only pan-tilt choice when it comes to outdoor solar power applications.

• Designed for Rugged Outdoor Environments
• Simple to Use - 4 Commands
• Built-In Web Interface
• 110/220 VAC or 10-40VDC Optional (native 12VDC operation)
• Low Power Consumption - approx. 3.5 watts
• Easy Installation
• Custom Web Page API
• Designed for -30C to +70C
• Compete System (PT Head, Interconnect Cable & Enclosure)

• SMART + IP PTZ Control System
  The SMART + IP PT Control System is a completely IP based position control system which have been designed to provide advanced remote pan-tilt positional control of a camera and a power zoom lens.

This system provides control of the JPTH-13 pan-tilt head and features 20 pan-tilt presets. Also stored in each preset is the power zoom lens zoom and focus preset data. Ten of these presets can be utilized in an automated Patrol function.

The SMART + version includes a hardened 5-port Ethernet switch with manual PoE configuration capabilities and enhanced lightning and surge protection on all the RJ45 jacks. The Ethernet switch makes field connection of a camera, wireless radio and the SMART + IP controller a simple task.

The low power consumption of this system makes it an ideal choice when it comes to remote solar power applications.

• Designed for Harsh Environments
• Pan-Tilt Preset Functions
• Automated Patrol Between any 10 Presets
• Built-In Web Interface
• 110/220 VAC or 10-40VDC Optional
• Low Power Consumption - approx. 5 watts
• Controls Power Zoom Lens (Standard is 8-96mm)
• Custom Web Page API
• Designed for -30C to +70C
• Compete Systems

• JPTH-13 Pan-Tilt Head
  The JPTH-13 Pan-Tilt Head is the ideal solution to facilitate the movement of IP as well as CCTV cameras in both fixed and mobile applications.

  The JPTH-13 head is an extremely rugged, highly engineered product which utilizes carefully selected components for reliable operation in all types of environments.

  This unit features precision machining throughout with environmental protection to IP68.

  With built in externally adjustable pan and tilt mechanical limit stops, feedback potentiometers and regenerative braking, this pan-tilt head is extremely easy to control and built for rugged duty

• Precision-Machined Pan-Tilt Head (13 lbs cap.)
• Rugged Construction (Fixed or Mobile)
• Externally Adjustable Pan-Tilt Limit Stops
• Precision Feedback Potentiometers
• Regenerative Braking
• Operating Voltage 12VDC (24VDC Optional)
• Draws Less Than 1.5W Per Axis
• IP68 Rated
• Operating Temperature -30C to +70C
• 2-Year Warranty
• MIL-C-26482 Connector
• Ideal for Remote Solar Power or Mobile Applications

• Mounting Accessories
  Mounting accessories include the following:
  • Wall mount arm
  • 3" pedestal
  • Pole mount (3" to 8" dia pole)
  • Corner mount
  • Parapet mount.

  The 3" pedestal allows the pan-tilt head and camera enclosure to be raised slightly providing better overall clearance for the all the needed cables.

  The wall mount supports 75 lbs.